Sony MVC-FD200 Back Cover Replacement

소개

This guide provides a step-by-step approach to safely removing the back cover of the Sony MVC-FD200. It ensures that users can access the internal parts of the camera for troubleshooting or replacement without harming the device. Whether you are replacing a faulty screen, cleaning the internal parts, or making other adjustments, this guide will help you navigate the process effectively.

필요한 것

1 단계 Battery

Sony MVC-FD200 Back Cover Replacement, Battery: 1 단계, 이미지 1개 중 1개

Using your finger, slide the tab on the battery door up to release the battery latch.

편집

2 단계

Lift the battery door to reveal the battery compartment.
Push the gray lever to the left side to remove the battery.
If any other repairs are needed, make sure to carefully remove the battery to avoid any electric shock or short circuits during repairs.

편집

3 단계 Back Cover

Sony MVC-FD200 Back Cover Replacement, Back Cover: 3 단계, 이미지 1개 중 1개

Turn the camera so that the top is facing down towards the table.
Using the Phillips #00 screwdriver, remove all 2.0 mm screws with the arrows facing towards them.

편집

4 단계

Flip the camera on both sides and remove the rest of the screws with arrows facing towards them.
Remove the 2.0 mm screws with the Phillips #00 screwdriver for both sides of the camera.

편집