소개
이 안내서의 단계를 따라 21.5" Retina 4K 2017 iMac에서 SATA 하드 드라이브를 업그레이드하거나 교체하세요. 드라이브를 업그레이드하는 경우, 파일과 운영 체제를 유지하려면 이 업그레이드를 수행하기 전에 기존 하드 드라이브 복제를 교체 대상에 수행해야 한다는 점에 유의하세요.
이 안내서의 일부 이미지는 시각적으로 약간의 차이가 있는 2015 iMac을 사용합니다. 이런 시각적 차이는 수리 절차에 영향을 미치지 않습니다.
필요한 것
-
이 단계에 사용된 도구:iMac Intel 21.5" Cardboard Service Wedge€4.95
-
iMac 작업을 시작하기 전에: 컴퓨터 플러그를 뽑고 전원 버튼을 10초 동안 눌러 전원 장치의 축전기를 방전하세요.
-
-
-
-
하드 드라이브 브래킷을 iMac에 고정하는 다음 T10 Torx 나사들을 풀어주세요:
-
21mm 나사 2개
-
9mm 나사 1개
-
27mm 나사 1개
-
기기를 재조립하려면 다음 지침을 역순으로 따르세요.
기기를 재조립하려면 다음 지침을 역순으로 따르세요.
다른 86명이 해당 안내서를 완성하였습니다.
다음 번역가들에게 특별히 감사 드립니다:
100%
Christian Kim님은 저희가 세상을 수리하는데 동참하신 분입니다! 기여하시겠습니까?
번역 시작하기 ›
36가이드 댓글
What type of SATA SSDs are compatible with iMac? I don't want to buy the kit because I have the necessary tools, but I'd like to know which brand of SSDs work the best.
>Will take any SATA SSD.
>On a mac with a fusion drive, it just removes the spinning drive from the mix, leaving you with a separate 28gig or 128 gig SSD drive that will appear on your desktop along with the newly installed SATA SSD.
>NO TEMPERATURE monitor is needed. This generation of iMacs has done away with the propietary temp sensor. It just relies on S.M.A.R.T. tech now.
Does the screen stick back on with the same adhesive or do you have to reapply new adhesive? If yes, does it come in the kit?
You have to apply new adhesive. Go slow and careful, it’s really not hard at all.